-
${discount_item.title} (-
) *${item.quantity}${item.item_text}${discount_item.title} (-
)
High Density Interconnect (HDI) PCB
High Density Interconnect (HDI) PCB Manufacturing
Precision HDI PCB manufacturing with engineering support. Blind/buried vias, laser micro-vias and fine-line capabilities for compact, high-density electronic designs.
Helping product teams shrink form factors without compromising manufacturability or signal integrity.
What Is an HDI PCB?
High Density Interconnect (HDI) PCBs use laser-drilled micro-vias, blind and buried vias and finer trace geometries to pack more functionality into a smaller board area. Unlike standard through-hole PCBs, HDI technology enables higher routing density, shorter signal paths and improved electrical performance for miniaturized electronics.
HDI technology is the standard for modern compact electronics where board space is constrained and signal integrity is critical. By using sequential lamination and micro-via structures, HDI boards can achieve routing densities that are impossible with conventional through-hole drilling.
Mechloong supports HDI designs from simple 1-stage constructions up to complex multi-stage stacked micro-via configurations, with full DFM review included before production begins.
Explore our PCB Prototyping service for fast-turn HDI validation builds, or review our DFM Guide for design best practices.
Core HDI Properties
Benefits of HDI PCB Technology
HDI technology delivers measurable advantages for products where size, weight and electrical performance matter.
Higher Routing Density
Micro-vias and fine-line geometries enable more connections per unit area, reducing total layer count and shrinking board dimensions.
Improved Signal Integrity
Shorter via stubs and optimized routing paths reduce signal reflections, lower EMI and improve high-speed signal performance.
Smaller Form Factor
Pack more functionality into less space. HDI is the enabling technology for modern compact consumer and industrial electronics.
Better Thermal Performance
Improved copper distribution and micro-via thermal paths support better heat dissipation for high-density component layouts.
Higher Reliability
Properly designed HDI structures with plated micro-vias deliver excellent mechanical and thermal cycling reliability.
Component Density Support
Compatible with fine-pitch BGAs, QFNs and advanced package types that require high pin density breakout routing.
HDI Design Considerations
Our engineering team reviews these critical factors during DFM to ensure manufacturability and performance.
Via Stacking Strategy
Evaluation of blind/buried via structure, stacking order and lamination sequence to balance density and manufacturability.
Micro-Via Reliability
Assessment of via aspect ratio, copper plating quality and thermal cycling performance for long-term field reliability.
Stackup Optimization
Layer configuration and dielectric thickness tuning to meet impedance targets and signal integrity requirements.
Pad & Annular Ring
Verification of pad dimensions and annular ring margins for laser-drilled vias to ensure reliable plating.
Impedance Control
Precise trace width and dielectric control for 50Ω, 75Ω, 90Ω and 100Ω differential and single-ended impedance.
Manufacturability Review
Full DFM assessment to identify yield risks before production, reducing delays and unnecessary cost.
HDI PCB Manufacturing Capabilities
Precision HDI manufacturing capabilities for prototype validation, engineering builds and low-volume production.
| Parameter | Prototype Capability | Production Capability |
|---|---|---|
| Layer Count | 4 – 32 Layers | 4 – 20 Layers |
| Min Laser Via Diameter | 0.075mm (3mil) | 0.10mm (4mil) |
| Min Mechanical Hole | 0.15mm (6mil) | 0.20mm (8mil) |
| Min Trace Width / Space | 2.5mil / 2.5mil | 3.0mil / 3.0mil |
| Via Structure | Blind, Buried, Stacked, Filled | Blind, Buried, Stacked |
| Copper Weight (Outer) | 0.5oz – 3oz | 1oz – 2oz |
| Impedance Tolerance | ±5% | ±10% |
| Max Panel Size | 550 × 900mm | 500 × 1000mm |
| Material Category | Supported Materials |
|---|---|
| Standard HDI | High-TG FR4 (Tg170 / Tg180 / Tg220), Shengyi S1000H, Lianmao IT180A |
| High-Speed HDI | Panasonic M4 / M6, Taiyao TU872-SLK, Shengyi S6N |
| High-Frequency HDI | Rogers RO4000 Series, Taconic TLX Series, mixed dielectric constructions |
| Surface Finishes | ENIG, ENEPIG, Immersion Silver, OSP, Hard Gold (edge connectors) |
Common HDI PCB Applications
HDI technology is essential wherever miniaturization and high-density component packaging are required.
Smartphones & Tablets
Wearable Electronics
IoT & Smart Devices
Medical Electronics
Automotive ADAS
Industrial Control Modules
Communication Modules
Test & Measurement
Why Choose Mechloong For HDI PCBs
Engineering-first HDI manufacturing support from prototype validation through low-volume production.
Free DFM Review
Every HDI project receives full manufacturability review before production, identifying via, stackup and yield risks early.
Direct Engineer Access
Technical questions are answered directly by engineering support — no ticket systems or account manager handoffs.
Prototype-Friendly
Low minimum order quantities and fast turnaround for HDI validation builds and design iteration cycles.
Prototype To Production
One engineering partner from initial HDI prototype through low-volume production, with consistent process and documentation.
Quality Assurance For HDI Boards
Structured inspection and verification at every manufacturing stage to ensure HDI reliability and conformance.
AOI Inspection
Automated optical inspection of trace geometry, registration and pad quality at each lamination stage.
X-Ray Verification
X-ray inspection of blind/buried and stacked vias to verify plating quality and internal registration.
Impedance Testing
TDR impedance verification on dedicated coupon structures to confirm target impedance values are met.
Electrical Testing
Flying probe or fixture-based continuity and isolation testing for full netlist verification.
Microsection Analysis
Cross-section analysis available to verify via plating quality and lamination bond integrity.
Final Visual Inspection
Comprehensive outgoing inspection before shipment to confirm all specifications are met.
How HDI PCB Projects Move Forward
A streamlined process with engineering review at every stage to ensure correct execution the first time.
Submit Gerber & Stackup
Engineering DFM Review
Formal Quotation
Precision Manufacturing
Multi-Stage Inspection
Worldwide Delivery
Frequently Asked Questions
Common questions about HDI PCB manufacturing, design requirements and our engineering support.
Standard PCBs use only through-hole vias that pass through the entire board, limiting routing density. HDI PCBs use laser-drilled micro-vias, blind vias that only go through a few layers, and buried vias that are fully internal. This enables much finer trace spacing, higher component density and smaller overall board dimensions, with improved signal integrity for high-speed designs.
Blind vias connect an outer layer to one or more inner layers but do not pass through the entire board. Buried vias connect only inner layers and are not visible from the outside. Stacked vias are micro-vias placed directly on top of each other across multiple layers, enabling maximum density in high pin-count BGA breakout areas. All three via types are core features of HDI technology.
Yes. We support HDI prototype projects with low minimum quantities and fast turnaround. Prototype HDI builds are ideal for design validation, functional testing and engineering verification before committing to larger volumes. Explore our PCB Prototyping service for more details on lead times and capabilities.
Yes. Every HDI project receives a full complimentary DFM review before production begins. Our engineering team evaluates via structure feasibility, annular ring margins, stackup configuration, impedance control and overall manufacturability, providing feedback and recommendations before production starts. Learn more in our DFM Guide.
Prototype HDI lead times typically range from 5 to 12 working days depending on layer count, via complexity and number of lamination stages. Simple 1-stage HDI designs can be turned faster than multi-stage stacked via constructions. Production lead times are confirmed during quotation based on your specific design requirements.
Absolutely. We support the full product lifecycle from initial HDI prototype through low-volume production. Using the same engineering partner throughout ensures process consistency, documentation continuity and a smoother transition from validation to commercial deployment. See our Low Volume Manufacturing service for production scaling.
We require standard Gerber files (RS-274X), drill files, stackup documentation, impedance specifications and any special fabrication notes. ODB++ and IPC-2581 formats are also accepted. Providing complete documentation helps us deliver an accurate quotation and thorough DFM review quickly.
Yes. We provide integrated PCB fabrication and SMT assembly for HDI designs, including fine-pitch component placement and BGA assembly. This simplifies your supply chain with a single point of contact for both bare board fabrication and populated assembly. Learn more on our PCB Assembly service page.
Building An HDI Product?
Submit your Gerber files and stackup documentation to receive engineering-supported HDI manufacturing recommendations and a formal quotation.